CP-9001: Description of an Indoor Test Facility for Evaluating a Roof...
The effects of solar heating potential and nocturnal cooling potential are simulated in a controlled indoor environment and extensive measurements are made along and between the boundary surfaces. Air...
View ArticleCP-0904: Adhered Veneers and Inward Vapor Drives: Significance, Problems, and...
This paper reports on field measurements collected from over a year of monitoring two types of wood-framed walls: one with an air gap membrane and another installed following standard practice. Each...
View ArticleCP-0910: Measuring the Impact of Interior Insulation on Solid Masonry Walls...
This paper describes a fully instrumented large-scale mock-up completed in a southern Ontario private school to allow direct comparisons between insulated and non-insulated walls with a focus on the...
View ArticleCP-0909: A Calibrated Multi-Zone Airflow Model for Extension of Ventilation...
The software CONTAM was used to create a calibrated mulit-zone model to replicate in-field tracer gas decay measurements of a new two story, 2,600 sq. ft., single-family house in Sacramento, CA under...
View ArticleCP-0908: A Method for Modifying Ventilation Airflow Rates to Achieve...
A calibrated ventilation model was exercised over a range of parameters seen in new and existing housing in the United States. This report was first published in ASHRAE Transactions (17, Louisville...
View ArticleCP-1002: Preliminary Modeling, Testing and Analysis of a Gas Tankless Water...
Tankless water heaters offer significant energy savings over conventional storage-tank water heaters, because thermal losses to the environment are much less. Although standard test results are...
View ArticleCP-1010: Innovative Passive Ventilation Water-Resistive Barriers—How Do They...
This paper is from the proceedings of the Thermal Performance of the Exterior Envelopes of Whole Buildings XI International Conference, December 5-9, 2010 in Clearwater, Florida. The issue of solar...
View ArticleCP-1011: Evaluation of Cladding and Water-Resistive Barrier Performance in...
This paper is from the proceedings of the Thermal Performance of the Exterior Envelopes of Whole Buildings XI International Conference, December 5-9, 2010 in Clearwater, Florida.The objective of this...
View ArticleCP-1013: Assessing the Freeze-Thaw Resistance of Clay Brick for Interior...
This paper is from the proceedings of the Thermal Performance of the Exterior Envelopes of Whole Buildings XI International Conference, December 5-9, 2010 in Clearwater, Florida. This paper summarizes...
View ArticleCP-1012: Residential Exterior Wall Superinsulation Retrofit Details and Analysis
This paper is from the proceedings of the Thermal Performance of the Exterior Envelopes of Whole Buildings XI International Conference, December 5-9, 2010 in Clearwater, Florida. The issues of climate...
View ArticleCP-1101: The Influence of Low-Permeance Vapor Barriers on Roof and Wall...
Low-permeance vapor barriers are widely used on the interior of wall and roof systems in large parts of North America. Many codes and standards imply or even state that low-permeance vapor barriers...
View ArticleCP-1102: San Francisco Bay Area Net Zero Urban Infill
This paper was first presented at the 2011 ASHRAE Annual Conference. A startup builder in the San Francisco Bay Area has a goal of producing factory built/modular houses with net zero energy...
View ArticleCP-1103: New England Net Zero Production Houses
This paper was first presented at the 2011 ASHRAE Annual Conference. A homebuilder in the New England area has been building net zero energy single family homes since 2008 and is continuing with...
View ArticleCP-1201: Masonry Wall Insulation Interior Embedded Beam Simulations
There is a large existing stock of uninsulated mass masonry buildings: their uninsulated walls result in poor energy performance, which is commonly addressed with the retrofit of interior insulation....
View ArticleCP-1301: Field Monitoring and Simulation of a Historic Mass Masonry Building...
Load-bearing masonry buildings are a significant portion of the existing building stock; however, adding insulation to the interior side of walls of such masonry buildings in cold, and particularly...
View Article
More Pages to Explore .....